manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3320 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon imageRUNNER ADVANCE C3320 Series Скачать руководство пользователя страница 461

NOTE:

With the previous models, the error code of E753-0001 occurs when downloading the system software for the option that is not
installed. With this machine, however, no error occurs even if downloading the system software for the option that is not installed.

■ Upgrading Procedure

● Obtaining the System Software (when Using SST or a USB Device)

Access the CDS server and download the system software of the machine.
When downloading the software, download the software for SST.
Save the downloaded software to the PC in which SST is installed.

● Starting the Machine in Download Mode (when Using SST or a USB Device)

Perform one of the following procedures to enter download mode.

• Entering download mode from service mode (recommended)

• COPIER > Function > SYSTEM > DOWNLOAD

• Starting the machine while pressing numeric keys 2 and 8 (safe mode)

● Upgrading the System Software

Upgrading is performed in two steps: downloading the system software and then writing it.
Download the system software with SST, a USB device, or via the Internet.
The system software downloaded to the machine is stored in the temporary storage space.
When the machine is restarted, the downloaded system software is written to the system area and applied.
When the system software is successfully applied, the machine is automatically restarted using the downloaded system software.

• Upgrading with SST

For details on the procedure, refer to 

“Version Upgrade via SST” on page 450

.

• Upgrading with a USB Device

For details on the procedure, refer to 

“Version Upgrade using USB Memory Storage Device” on page 456

.

• Upgrading with CDS

For details on the procedure, refer to 

“Updater” on page 198

.

● Checking the Version

Execute the following service mode to confirm whether the processing was completed correctly.

• COPIER > DISPLAY >VERSION

■ Automatic Update

In addition to the system software for the Main Controller, the machine retains the system software for DCON and all options in
its Main Controller.
Therefore, when options are installed, etc., their versions and the versions retained in the Main Controller are compared and
automatically updated to a combination of versions that is guaranteed to operate.

Target PCB

COPIER > DISPLAY > VERSION

DC Controller PCB

DC-CON

Finisher Controller PCB (Staple/Saddle Finisher-U1)

SORTER

Finisher Controller PCB (Inner Finisher-G1)
Saddle Stitcher Controller PCB

SDL-STCH

Buffer Pass Controller PCB

BF-PASS

2-Line FAX Board

FAX2/3/4

Image Data Analyzer Board

TSP-JLK

6. Troubleshooting

449

Содержание imageRUNNER ADVANCE C3320 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды