manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3320 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon imageRUNNER ADVANCE C3320 Series Скачать руководство пользователя страница 208

No.

Code

Character strings

Cause

Remedy

11

8xxx 0201
8xxx 0202
8xxx 0203
8xxx 0204
8xxx 0206

Server schedule is invalid During the communication test, there

has been some kind of error in the
schedule values passed from UGW.

When the error occurs, report the de-
tails to the support section.
After the UGW side has responded, try
the communication test again.

12

8xxx 0207
8xxx 0208

Internal Schedule is bro-
ken

The schedule data in the inside of E-
RDS is not right.

Perform a communication test (COM-
TEST).

13

8xxx 0221

Server specified list is too
big

Alarm/Alert filtering error: The number
of elements of the list specified by the
server is over restriction value.

Alert filtering is not supported by UGW.

14

8xxx 0222

Server specified list is
wrong

Alarm filtering error: Unjust value is in-
cluded in the element of the list speci-
fied by the server.

Alert filtering is not supported by UGW.

15

8xxx 0304

Device is busy, try later

The semaphore consumption error at
the time of a communication test.

Try again a communication test after a
period of time.

16

8xxx 0709

Tracking ID is not match When upgrading firmware, the Track-

ingID notified by Updater differs from
the thing of UGW designates.

Obtain the sublog, and contact the sup-
port department of the sales company.

17

8xxx 2000

Unknown error

Some other kind of communication er-
ror has occurred.

Perform and complete a communication
test (COM-TEST).

18

8xxx 2001

URL Scheme error(not
https)

The header of the URL of the registered
UGW is not in https format.

Check that the value of URL of UGW
(RGW-ADR) is https://a01.ugwde-
vice.net/ugw/agentif010.

19

8xxx 2002

URL server specified is il-
legal

A URL different to that specified by the
UGW has been set.

Check that the value of URL of UGW
(RGW-ADR) is https://a01.ugwde-
vice.net/ugw/agentif010.

20

8xxx 2003

Network is not ready, try
later

Communication attempted without con-
firming network connection, just after
turning OFF and then ON the main pow-
er of this machine in which the network
preparations are not ready.

Check the network connection, as per
the initial procedures described in the
troubleshooting.
Perform a communication test (COM-
TEST) about 60 seconds later, after turn
on the device.

21

8xxx 2004

Server response error
([Hexadecimal]) [Error
detailed in UGW]

*1

Communication with UGW has been
successful, but an error of some sort
has prevented UGW from responding.

Try again after a period of time.
Check detailed error code (Hexadeci-
mal) and [Error details in UGW] from
UGW displayed after the message.

22

8xxx 200A

Server connection error

• TCP/IP communication fault
• The IP address of device is not set.

• Check the network connection, as

per the initial procedures described
in the troubleshooting.

• When proxy is used, make the set-

tings for proxy, and check the sta-
tus of the proxy server.

23

8xxx 200B

Server address resolu-
tion error

Server address name resolution has
failed.

• Check that the value of URL of

UGW (RGW-ADR) is https://
a01.ugwdevice.net/ugw/agen-
tif010.

• Check that Internet connection is

available in the environment.

24

8xxx 2014

Proxy connection error

Could not connect to proxy server due
to improper address.

Check proxy server address / port and
re-enter as needed.

25

8xxx 2015

Proxy address resolution
error

Could not connect to proxy server due
to name resolution error of proxy ad-
dress.

• Check that the proxy server name

is correct. If the proxy server name
is correct, check the DNS connec-
tion, as per the initial procedures
described in the troubleshooting.

• Specify the IP address as the proxy

server name.

26

8xxx 201E

Proxy authentication er-
ror

Proxy authentication is failed.

Check the user name and password re-
quired in order to login to the proxy, and
re-enter as needed.

2. Technology

196

Содержание imageRUNNER ADVANCE C3320 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды