Canon imagePRESS C7000VP Series, Информация по устранению неполадок

Страница: 115 / 137

Trouble Shooting Information for C7000VP series
Page 115
Rev. 2.0
2010/09/17

Adjusting the Image Clear Level of the ITB of a Custom Paper Type
1. Press [Change] next to <ITB Image Clear Adjustment>.
2. Press [-] or [+] to adjust the image clear level > press [OK].
This feature enables you to change the custom paper type setting of image clear level of the
ITB. When automatic cleaning is not sufficient to remove the toner residue on the transfer belt,
toner residue may transfer to the paper, and this could adversely affect the quality of the image.
In this case, increase the value gradually, and in case of no improvement, decrease the value
gradually.
Note:
If the condition is not improved even after you have adjusted the value in both [-] and [+]
directions, adjust the Secondary Transfer Voltage value. The condition may be improved by
adjusting the Secondary Transfer Voltage value in the [-] direction. Changing the value
extensively may affect the output quality. So, adjust while checking the output image.

Adjusting the Saddle Stitch Position of a Custom Paper Type
1. Press [Change] next to <Saddle Stitch Position Adjust>.
2. Press either of triangles to adjust the saddle stitch position > press [OK].
If you are using the Saddle Stitch mode of the optional Saddle Finisher-AB2, and you notice
that the folds of the paper are not exactly in the middle of the booklet, make fine adjustments to
the saddle stitch position of custom paper type.

Increasing the setting value will shift the saddle stitch position right toward the printing
surface.

Decreasing the setting value will shift the saddle stitch position left toward the printing
surface.
Note:
This mode is available only if the optional Saddle Finisher-AB2 is attached. Changing this
feature will change both the positions of folding and stapling. In other words, you cannot adjust
these two positions individually