CHAPTER 3 DISASSEMBLY & REASSEMBLY
4. Feed Roller Drive Shaft
5. Follower Roller
Note:
The rollers on the registration side and
the eject side are the same
component.
1) Remove the front unit.
2) Remove the front cover.
1) Open the front unit, spread open the
fitting parts
{
1
on both sides, and then
remove the follower roller
{
2
.
3) Spread open the fitting part
{
1
and
remove the feed roller drive shaft
{
2
.
Note:
In the below figure, the roller in the
registration side is removed.
Figure 3-205
Figure 3-206
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-C125 FIRST EDITION
3-7