Canon imageCLASS X LBP1238, Руководство по обслуживанию

Страница: 62 / 220

■ Combination of Information Exported/Imported by DCM, Means, and Storage
Locations
A DCM file is exported and imported using the Control Panel, remote UI, or the iW EMC server, depending on the situation of the
site.
The information exported/imported differs depending on the means.
Combinations of them are shown in the following table.
Menu used Operation Information exported Save destination
Setting values of
menu options
Address book*
*1 Service mode set-
ting
values
[Settings/Registra-
tion]
menu Control panel
Yes (fixed)
*2
Yes (fixed)
*2
No USB flash drive
Remote UI Yes Yes
With conditions
*3
PC local disk
Service mode Control panel No No Yes USB flash drive / Storage in the
host machine
Remote UI No No Yes Storage in the host machine
■ Compatibility of Data
The following table shows compatibility of data in the case where the device from which the data is exported and the device to
which the data is imported differ in model and/or serial number.
For items that are imported in Cases A, B, and C, refer to
“List of Items Which Can Be Imported” on page 205 .
Model Serial number Import process
Same Same
Items corresponding to Case A are imported.
*4
Same
Different
*5
Items corresponding to Case B are imported.
*4
Different
Different
*5
Items corresponding to Case C are imported.
*6
Different Same The file is judged to be invalid, and the process ends with an error.
■ Replacement Mode
When this function is used for migrating the setting data upon replacement of a device, some of the data cannot be migrated
depending on the model to which the data is migrated.
When this function is used in normal mode, data that is applicable to either Case B (of different serial number) or Case C (of
different mode) cannot be imported.
When replacement mode of the device to which the data is imported is enabled, data can be forcibly migrated even to a device
of a different serial number or even between different models.
Case A
Case B
Case C
Case A
Case B
Case C
Normal mode
Replace mode
*1. Models without address books are excluded. In the case of a fax option model without SEND function, address books are
exported only if a fax option is connected with the device.
*2. When the [Settings/ Registration] menu is used from the Control Panel, both the setting menu information and the address book
are imported/exported. It is not possible to export/import only either of them.
Information which is not included in the data to be imported is not imported.
*3. Service mode is added to the data to be exported only when service mode COPIER > OPTION > USER > SMD-EXPT is set.
For information on items that are imported, refer to "List of Items Which Can Be Imported".
*4. If the firmware version at the time of import differs from that at the time of export, predetermined corrective processing may be
performed.
*5. If a serial number is missing, the serial numbers are judged to be mismatched.
*6. Predetermined corrective processing may be performed.
3. Technical Explanation (System)
52