Canon imageCLASS X LBP1238, Руководство по обслуживанию

Страница: 35 / 220

The machine has 2 power supply fuses (FU101 and FU102) inside the PCB as an additional protection function. If overcurrent
occurs in the AC line, the power supply fuse blows and cuts off the power supply.
NOTE:
This machine has a function that stops supplying the +24VB and +24VC when the Cartridge Door Switch is turned OFF for the
safety of users and service technicians.
As the power of this machine is turned ON/OFF by the remote switch control circuit, power is supplied to the AC line even when
the Power Switch is turned OFF. Never disassemble the machine while the Power Supply Cord is connected to the inlet.
Power-saving Mode
Overview
Power-saving mode is a function that reduces the printer power consumption.
Description
The auto sleep time has passed.
The automatic shutdown time has passed.
Standby
Control Panel
DC Controller
PCB
Main Controller
PCB
Sleep1B
Sleep1A
Power-off
The power switches is pressed.
Automatically shifted
depending on the conditions
Au
to
m
a
ti
ca
lly
sh
if
te
d
d
e
p
e
n
d
in
g
o
n
t
h
e
co
n
d
it
io
n
s
The reader is turned
ON only when it is
used
AC OFF
Sleep3
Service call
Standby recovery event
No service error (no error requiring a service visit)
has occurred
←A job is generated /completed→
Explanation
of the status
Non-all-night
24V ON
Non-all-night
24V ON
Power-on
Power-saving
Power-off
State Description
Standby The machine moves to a standby state by turn-
ing ON the main switch. When introduction of jobs become possible, timers of the auto low power
time and auto sleep time start counting.
Sleep 1A The machine is in a state where the 24V non-
all-night power is ON. When the auto sleep time has elapsed, transition to sleep 1A occurs.
Sleep 1B The machine is in a state where the 24V non-
all-night power is OFF. Sleep 1B is a state where CPU moves to an operation state from sleep 3
by a hardware interruption.
Sleep 3 The controller itself gets into a power-saving
mode. In this mode, CPU of the controller has stopped. (The most effective power
saving state)
Service er-
ror When an error requiring a service visit occurs,
the machine moves to this state. Power state of the printer remains in power-saving mode so that the ma-
chine can respond to request from service mode.
Sleep
Mode Eco
Exit It is a function that saves power consumption and improves noise reduc-
tion by letting the machine gets into a standby state without turning ON
the engine and reader when recovering from sleep.
2. Technical Explanation (Device)
25