Canon imageCLASS X LBP1238, Руководство по обслуживанию

Страница: 138 / 220

2. Enter service mode.
A Setup Guide screen (in English) for setting the time and date will appear. Forcibly open the service mode screen.
3. Location information setting
[Setting value]
1: Japan, 2: North America, 3: Korea, 4: China, 5: Taiwan, 6: Europe, 7: Asia, 8: Oceania, 9: Brazil, 10: Latin America
• COPIER > OPTION > BODY > LOCALE
4. Paper size configuration setting
[Setting value]
1: AB configuration, 2: Inch configuration, 3: A configuration, 4: AB/Inch configuration
• COPIER > OPTION > BODY > SIZE-LC
5. Clear the setting information
• COPIER > FUNCTION > CLEAR > ALL
■ Executing Initial Adjustment
1. To set the wireless LAN function, enter the service mode shown below and change the setting value to [1]. (In the
case of the host machine having the wireless LAN function)
• COPIER > OPTION > ACC > WLAN
2. Setup Guide will be activated by turning OFF and then ON the power of the host machine. Configure the settings
according to the instruction on the screen.
3. In the following service mode, adjust the Touch Panel.
• COPIER > ADJUST > PANEL > TOUCHCHK
■ Migrating the User Data and Service Mode Setting Information
1. Enter service mode, and set the following item to [1].
• COPIER > OPTION > USER > SMD-EXPT
NOTE:
The setting [SMD-EXPT] can be configured either from the Control Panel or remote UI.
2. Restore the data in the same way as that of backup.
Refer to the Backup List for the details of items that are restored. “Backup Data List” on page 202
• COPIER > FUNCTION > SYSTEM > IMPORT
• Menu > Management Settings > Data Management > Import/Export > Import
• RUI > Settings/Registration > Management Settings > Data Management > Import/Export > Import
CAUTION:
Be sure to restore the data after replacing the Main Controller PCB.
3. Enter service mode, and set the following item to [0].
• COPIER > OPTION > USER > SMD-EXPT
NOTE:
The setting [SMD-EXPT] can be configured either from the Control Panel or remote UI.
6. Adjustment
128