Canon imageCLASS X LBP1238, Руководство по обслуживанию

Страница: 195 / 220

COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
CDS-FIRM Set to allow firmware update by admin
Detail To set whether to allow the user (administrator) to perform firmware update linked with CDS and
collection of log files.
Use Case When allowing the administrator to update the firmware
Adj/Set/Operate Method 1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
Caution Do not use it for purposes other than collecting log files.
Be sure to return the value to 0 after use.
Display/Adj/Set Range 0 to 1
0: Disabled, 1: Enabled
Default Value It differs according to the location.
CDS-LVUP Set to allow CDS periodical update
Detail To set whether to allow the user (administrator) to perform periodical update linked with CDS.
When 1 is set, setting of periodical update can be made in via remote UI.
Use Case
When allowing the user/service technician to perform periodical update
Adj/Set/Operate Method
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Disabled periodical update
1: Enabled periodical update
Default Value
It differs according to the location.
CRG-PROC Setting of behavior at end of cartridge lifetime
Detail To set the operation of the machine when the parts counter of the cartridge reaches the estimated
life value.
Adj/Set/Operate Method Enter the setting value, and then press Apply key.
Display/Adj/Set Range 0 to 2
0: Not stopped
1: Stopped once
2: Completely stopped
Default Value 0 (B/W model)
1 (Color model)
2 (Dealer model)
CRGLF-K Setting of replacement reference values of Photosensitive Drum, Developing Assembly and
Waste Toner (Bk)
Detail To set the reference values for judging replacement of the component other than toner
(Photosensitive Drum, Developing Assembly, and waste toner) included in the life of Bk-color
cartridge.
These values are used as the basis for calculation of component other than toner when deriving
the estimated life value of the cartridge.
Use Case When toner consumption is low (when the life of the Photosensitive Drum or the Developing
Assembly decreases faster than that of toner)
Adj/Set/Operate Method Enter the setting value, and then press Apply key.
Display/Adj/Set Range
100 to 200
Unit
0.01
Default Value
100
Dealer model differs according to the model.
9. Service Mode
185