Canon imageCLASS X LBP1238, Руководство по обслуживанию

Страница: 57 / 220

Version Upgrade Using UST
UST is included in the firmware for the machine that can be downloaded from the website of CINC. Firmware is downloaded as
a zip file and a folder containing UST is extracted by decompressing the file.
When executing UST on the PC connected to the machine with a USB Cable, the firmware can be upgraded by downloading it
from the PC to the machine. For the detailed procedure, refer to "User Support Tool Operation Guide" stored in the decompressed
folder. "User Support Tool Operation Guide" is also available on the website of CINC.
Firmware
PC
USB cable/
Network cable
Firmware
Version Upgrade via Internet
Connect to the Internet using the network function of the device, and download and upgrade the latest firmware from the server.
If the device is in an environment where Internet connection is available, firmware versions can be upgraded only by operation
from the menu without using PC.
■ Prerequisite
In order to perform version upgrade of the device via Internet, the following conditions must be met.
There should be no other jobs being executed.
Firmware cannot be upgraded while there is a job being executed. If there is a job being executed, wait for completion of the
job and then perform the work.
The device should be able to be connected to the external network.
If connection is not available because, for example, there is a proxy server, follow the e-Manual to configure the proxy server
settings and enable connection to the external network.
The serial number of the host machine should be shown on the Main Controller PCB.
Whether or not the serial number of the host machine is shown on the Main Controller PCB can be checked from the Control
Panel or SPEC REPORT.
Procedure to check from SPEC REPORT
1. Execute the following service mode to print SPEC REPORT.
• COPIER > FUNCTION > MISC-P> SPEC
3. Technical Explanation (System)
47