manualshive.com logo in svg

Canon imageCLASS X LBP1238, Руководство по обслуживанию

Поделиться
Скачать
Canon imageCLASS X LBP1238 Скачать руководство пользователя страница 162

E744-0002--

Language file error

Detection Description

The size of the language file exceeded the allowed size.

Remedy

1. Update the firmware.

E744-1001--

Version mismatch between BOOTABLE and BOOTROM

Detection Description

A version mismatch between the main program and the start-up program.

Remedy

1. Update the firmware.

E744-4000--

Invalid engine connection error

Detection Description

It was detected that an invalid engine was connected.

Remedy

1. Check whether a proper Engine Controller PCB (UN1) is installed.
2. Update the firmware.
3. Replace the Engine Controller PCB (UN1).

E744-5000--

Communication error between Control Panel PCB and Main Controller PCB

Detection Description

Communication with the Control Panel PCB could not be established.

Remedy

1. Check the harness/connector between the Panel PCB (UN31) and the Main Controller PCB
(UN30).
2. Replace the Control Panel (including the Panel PCB (UN31)).
3. Replace the Main Controller PCB (UN30).

E744-6000--

Communication error with Wireless LAN PCB

Detection Description

Communication with the Wireless LAN PCB could not be established.

Remedy

1. Turn OFF and then ON the main power.
2. Check the harness/connector between the Wireless LAN PCB (UN35) and the Main Controller
PCB (UN30).
3. Install the set of controller firmware.
4. Replace the Wireless LAN PCB (UN35).
5. Replace the Main Controller PCB (UN30).

E744-7000--

Backup microcomputer error

Detection Description

An error in the microcomputer that retains fax job information of the Main Controller PCB.

Remedy

1. Update the firmware.
2. Replace the Main Controller PCB (UN30).

E766-8000--

Firmware error

Detection Description

Information on digital registration could not be obtained.

Remedy

1. Install the Engine Controller firmware.
2. Install the set of controller firmware.
3. Replace the Engine Controller PCB (UN1).

E766-9000--

Scanner power state error

Detection Description

Error in the power state of the Laser Scanner Unit (firmware-dependent).

Remedy

1. Update the firmware.
2. Replace the Laser Scanner Unit.

E804-0004--

Controller FAN Error

Detection Description

Remedy

1. Verify power to FAN.
2. Replace the FAN
3. Check if FAN is connected.

E806-0000--

Main Fan error

Detection Description

The Main Fan fails to rotate at the specified rotation speed.

Remedy

1. Check the connection of the Main Fan (FM1).
2. Replace the Main Fan (FM1).

8. Error/Jam/Alarm

152

Содержание imageCLASS X LBP1238





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды