Canon image Prograf iPF780 Series, Руководство пользователя

Страница: 611 / 648

Cause Corrective Action
Paper has been loaded
askew, or warped paper
has been loaded.
3.
If " Not finished printing. Finish printing remaining jobs? " is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
If this error recurs after you reload the roll, remove the Roll Holder from the printer, push the roll firmly in until
it touches the Roll Holder flange, and reload the Roll Holder in the printer.
(See "Attaching the Roll Holder to Rolls.")
➔
P.370
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Load the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
➔
P.392
3. Pull the Release Lever forward.
4.
If " Not finished printing. Finish printing remaining jobs? " is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
Insufficient paper for job
Insufficient paper for job
Cause Corrective Action
The printer has received a print job longer than the amount of roll paper left when
ManageRemainRoll in the Control Panel menu is On .
Press ▲ or ▼ to select Print , and then press the
OK button to resume printing.
However, the roll paper may run out during the
print job and you may not be able to print all of the
document.
Press ▲ or ▼ to select Change Paper , and then
press the OK button to stop printing.
Either change the printer driver Paper Source set-
ting or the GL2 Settings > Paper Source setting
in the printer menu or replace the roll with a roll
that has enough paper for the print job, and then
try printing again.
(See "Removing the Roll from the Print-
er.")
➔
P.378
(See "Loading Rolls in the Printer.")
➔
P.373
Press ▲ or ▼ and select Stop Printing or press
the Stop button to stop printing.
This paper cannot be used.
This paper cannot be used.
Cause Corrective Action
Paper smaller than the printer's minimum supported
size has been loaded. Push the Release Lever back and load paper of the correct size.
(See "Paper Sizes.")
➔
P.360
Paper has been loaded that is too small to print the test
pattern for printhead adjustment or nozzle checking. Push the Release Lever back and load unused paper of A4 size or larger.
More than one sheet may be required depending on the adjustment.
Roll printing is selected.
Roll printing is selected.
Cause Corrective Action
You have attempted to print on a roll, but
no roll is loaded. Press ▲ or ▼ to select " Load Roll Paper ", and then press the OK button. Load the roll, and
then print.
(See "Attaching the Roll Holder to Rolls.")
➔
P.370
(See "Loading Rolls in the Printer.")
➔
P.373
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
iPF780
Insufficient paper for job
User's Guide
Error Message
Messages regarding paper
611