137
Advanced Guide
Basic Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
4
Establish a connection with an
access point.
●
Connect to the access point as described
in steps 4 – 6 in “Using WPS-Compatible
in “Connecting to Listed Access Points”
5
Enter your email address.
●
Once the camera is connected to CANON
iMAGE GATEWAY via the access point, a
screen is displayed for entering an email
address.
●
Enter your email address, press the
[ ][ ] buttons or turn the [ ] dial to
choose [Next], and then press the [ ]
button.
6
Enter a four-digit number.
●
Enter a four-digit number of your choice,
press the [ ][ ] buttons or turn the [ ]
dial to choose [Next], and then press the
[ ] button.
●
You will need this four-digit number later
when setting up linkage with CANON
iMAGE GATEWAY in step 8.
Registering CANON iMAGE GATEWAY
Link the camera and CANON iMAGE GATEWAY by adding CANON
iMAGE GATEWAY as a destination Web service on the camera. Note
that you will need to enter an email address used on your computer or
smartphone to receive a notification message for completing linkage
settings.
1
Access the Wi-Fi menu.
●
Move the power switch to [
].
●
Press the [ ] button.
●
If the [Device Nickname] screen is
displayed, press the [ ][ ] buttons or
turn the [ ] dial to choose [OK], and then
press the [ ] button.
2
Choose [
].
●
Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose [
], and then
press the [ ] button.
3
Accept the agreement to enter an
email address.
●
Read the agreement displayed, press
the [ ][ ] buttons or turn the [ ] dial to
choose [I Agree], and then press the [ ]
button.