Canon EOS C500 Скачать руководство пользователя страница 44

Страница: 44 / 212

Preparing Recording Media

Removing a CF card

1 Wait until the access indicator for the card slot with the CF

card to be removed is off.

2 Slide the CF card slot cover switch in the direction of the arrow.

• The CF card slot cover will open upward (slot A) or downward

(slot B).

3 Push the CF card release button.

• The release button partially pops out.

4 Push in the CF card release button to release the CF card.

5 Pull the CF card all the way out and close the CF card slot

cover.

IMPORTANT

• Observe the following precautions while the CF

or CF

access

indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not open the cover of the CF card slot being accessed.

NOTES

• If you set the [

Other Functions]

[Media Access LED] function to [Off], the access indicators will not

illuminate.

Inserting and Removing an SD Card

1 Turn off the camera.

2 Open the SD card slot cover.

3 Insert the SD card all the way into the SD card slot until it clicks.

• The SD card slot is positioned at an angle. Align the SD card straight

in relation to the SD card slot, with the label facing the lens.

4 Close the SD card slot cover.

• Do not force the cover closed if the SD card is not correctly inserted.

IMPORTANT

• Observe the following precautions while the SD card access indicator is flashing. Failure to do so may result in

permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not remove the SD card.

• Turn off the camera before inserting or removing an SD card. Inserting or removing the SD card with the

camera on may result in permanent data loss.

• SD cards have front and back sides that are not interchangeable. Inserting an SD card facing the wrong

direction can cause a malfunction of the camera. Be sure to insert the SD card as described in step 3.

NOTES

•

To remove the SD card:

Push the SD card once to release it. When the SD card springs out, pull it all the way

out.

SD card access
indicator

COP

Содержание EOS C500





















































































































































































































Результаты поиска

Содержание EOS C500

Отзывы:

Бренды по названию

Популярные бренды

Canon EOS C500, Инструкция по эксплуатации

Результаты поиска

Содержание EOS C500

Отзывы:

Бренды по названию

Популярные бренды