Canon EOS C500, Инструкция по эксплуатации

Страница: 106 / 212

Special Recording Modes
106
Activating Interval Recording Mode and Recording
1 Open the [Special Rec] submenu.
[ 4K/2K/MXF Setup]
>
[Special Rec]
2 Select [Interval Rec] and then press SET.
• [INT STBY
`
] (during 4K and 2K modes) or [INT STBY] (during MXF
mode) appears at the top of the screen (with [INT] flashing).
3 Press the START/STOP button to begin recording.
• The set number of frames are recorded automatically at the set interval.
• The tally lamp illuminates.
• [INT] changes to [
Ü
INT] while recording frames.
4 Press the START/STOP button again to stop recording.
• All of the recorded frames are joined together into one clip.
• [INT STBY
`
] (during 4K and 2K modes) or [INT STBY] (during MXF mode) appears at the top of the screen
(with [INT] flashing).
• The tally lamp goes out.
NOTES
• You can use only one special recording mode at a time.
• While recording, you cannot change the interval or number of frames.
• Some frames at the point the recording was stopped may be recorded and added to the end of the clip.
• Interval recording mode will be deactivated if the special recording mode is changed or turned off. It will be
deactivated also if you change the video configuration.
• During this special recording mode, the running mode of the time code (
A
84) can be set to [Rec Run] or
[Regen.]*. The time code advances by the number of frames recorded. If the running mode of the time code
(
A
84) is set to [Free Run] or the time code is input from an external source, the running mode will switch to
[Rec Run] during special recording mode. When special recording mode is deactivated, the running mode will
return to its previous setting.
• During special recording mode, the time code signal will not be output from the MON. terminals, TIME CODE
terminal or HD/SD SDI terminal. During 4K and 2K modes, the time code signal will be output from the 3G-SDI
terminals.
* During MXF mode only.
Frame Recording Mode
Set the number of frames in advance. We recommend operating the camera remotely or stabilizing the camera,
for example, on a tripod. Sound is not recorded in this mode. During 4K and 2K modes, MXF clips will not be
recorded simultaneously on a CF card even if a card is inserted in the camera.
Operating modes:
[ 4K/2K/MXF Setup]
[ Special Rec]
[Off]
COP
Y