Canon EOC-1DX, Инструкция по эксплуатации

Страница: 341 / 722

341
8 5: Custom Controls
During flash photography, pressing the button assigned to this function
will fire a preflash and record the required flash output (FE lock).
You can press <
0
> to change the ISO speed. Set while looking at the
top LCD panel, viewfinder, or LCD monitor.
You can set the ISO speed by holding down <
0
> and turning the
<
6
> dial. If Auto ISO is set, manual ISO speed setting will take effect.
Auto ISO cannot be set. If you use this function in the <
a
> mode, you
can adjust the exposure with the ISO speed while maintaining the
current shutter speed and aperture.
During metering, you can set the ISO speed by turning the <
5
> dial.
If Auto ISO is set, manual ISO speed setting will take effect. Auto ISO
cannot be set. If you use this function in the <
a
> mode, you can adjust
the exposure with the ISO speed while maintaining the current shutter
speed and aperture.
During metering, you can set the ISO speed by turning the <
5
> dial.
The functions of the <
O
> and <
i
> buttons will be switched between
them. By pressing the <
i
> button and turning the <
6
> dial, you
can set the exposure compensation or aperture.
: FE lock
: Set ISO speed
: Set ISO speed (hold button, turn )
: Set ISO speed ( during metering)
: Set ISO speed,
O
z
g ( during metering)
COP
Y