Canon EOC-1DX, Инструкция по эксплуатации

Страница: 175 / 722

175
Exposure compensation can brighten (increased exposure) or darken
(decreased exposure) the standard exposure set by the camera.
Exposure compensation can be set in the
d
/
s
/
f
shooting modes.
Although you can set the exposure compensation up to ±5 stops in 1/3-
stop increments, the exposure compensation indicator in the viewfinder
and on the top LCD panel can only display the setting up to ±3 stops. If
the exposure compensation amount exceeds ±3 stops, setting it with
the Quick Control (p.51) is recommended.
1
Check the exposure.
Press the shutter button halfway (
9
)
and check the exposure level indicator.
2
Set the exposure compensation
amount.
While looking at the viewfinder or top
LCD panel, turn the <
5
> dial.
If you cannot set the exposure
compensation, set the power switch
to <
1
>, then turn the <
5
> dial.
X
When exposure compensation is set,
the <
y
> icon will be displayed in the
viewfinder.
To cancel exposure compensation, set the
exposure level indicator <
/
N
> to the
standard exposure index (<
a
/
C
>).
3
Take the picture.
O
Setting Exposure Compensation
Increased exposure
Decreased exposure
If [
z
2: Auto Lighting Optimizer ] (p.146) is not set to [ Disable ], the image
may still look bright even if a darker exposure compensation amount was set.
The exposure compensation amount will remain in effect even after you
set the power switch to <
2
>.
After setting the exposure compensation amount, you can set the power switch to
<
R
> to prevent the exposure compensation amount from changing accidentally.
If the exposure compensation amount exceeds ±3 stops, the end of the
exposure level indicator will display <
I
/ > or <
J
/ >.
You can also set it by pressing the <
O
> button and turning the <
6
> or <
5
> dial.
COP
Y