Canon EOC-1DX Скачать руководство пользователя страница 30

Страница: 30 / 722

Connect the charger to a power outlet.

Connect the power plug to a power
outlet, and connect the power cord to
the charger.

When no battery is attached, all the
indicator lamps will be off.

Remove the protective covers.

As shown in the illustration, detach
the charger’s protective cover
(provided) and the battery’s protective
cover (provided).

Recharge the battery.

Slide the battery into the charger’s
slot as shown by the arrow, and make
sure it is securely attached.

You can attach the battery to slot A or B.

The battery will start recharging and
the green status lamp will blink.

When the battery is fully charged, all
three Charge level indicators will light
up (50%/80%/100%).

It takes approx. 130 min. for LP-E4N and approx. 120 min. for LP-
E4 to fully recharge a completely exhausted battery at 23°C/73°F.

The time required to recharge the battery will vary greatly
depending on the ambient temperature and the battery’s
remaining capacity.

Charging the Battery

The LC-E4N charger cannot charge any battery other than the Battery
Pack LP-E4N/LP-E4.

Depending on the battery’s condition, charge may not reach 100%.

COP

Содержание EOC-1DX



















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание EOC-1DX

Отзывы:

Бренды по названию

Популярные бренды

Canon EOC-1DX, Инструкция по эксплуатации

Результаты поиска

Содержание EOC-1DX

Отзывы:

Бренды по названию

Популярные бренды