manualshive.com logo in svg

Canon EOC-1DX, Инструкция по эксплуатации

Поделиться
Скачать
Canon EOC-1DX Скачать руководство пользователя страница 150

150

You can minimize overexposed highlight areas.

1

Select [Highlight tone priority].

 

Under the [

z

2

] tab, select 

[

Highlight tone priority

], then press 

<

0

>.

2

Select [Enable].

 

Turn the <

5

> dial to select [

Enable

], 

then press <

0

>.

 

Highlight details are improved. The 
dynamic range is expanded from the 
standard 18% gray to bright 
highlights. The gradation between the 
grays and highlights becomes 
smoother.

3

Take the picture.

 

The image will be recorded with 
highlight tone priority applied.

3

 Highlight Tone Priority

 

With [

Enable

], the Auto Lighting Optimizer (p.146) is automatically set to 

[

Disable

] and the setting cannot be changed. When [

Highlight tone 

priority

] is set to [

Disable

], the Auto Lighting Optimizer will revert to its 

original setting.

 

With [

Enable

], image noise may increase slightly more than with 

[

Disable

].

With [

Enable

], the settable range will be ISO 200 - 51200 (ISO 200 - 25600 

for movie shooting). Also, the <

A

> icon will be displayed in the viewfinder 

and on the top LCD panel when highlight tone priority is enabled.

COP

Y

Содержание EOC-1DX



















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды