Canon DADF-R1, Руководство по обслуживанию

Страница: 45 / 222

Chapter 2
2-19
5) Loosen the fixing nut [1] found at the rear of the
right hinge unit, and turn the adjusting screw [2]
to adjust.
- If A > 0, turn the adjusting screw
counterclockwise.
- If B > 0, turn the adjusting screw clockwise.
F-2-63
6) Tighten the fixing nut to fix the adjusting screw in
place.
2.3.3 Horizontal Registration
Adjustment (imagePRESS
C1Series, imagePRESS
C7000Series)
0013-0256
Horizontal Registration Adjustment for the
following 2:
- pickup from the original tray <See A for details>
- pickup from the manual feeder tray <See B for
details>
A. Pickup from the Original Tray
1) Remove the DADF controller cover [1].
- 1 screw [2]
F-2-64
2) Set the DIP switch (SW1) on the DADF controller
PCB as follows:
F-2-65
3) Turn OFF the power.
4) Place a single sheet of A4 or LTR copy paper [1]
in the original tray.
F-2-66
5) Press the push switch (SW2) on the DADF
controller PCB once.
-> In response, the original is picked up and
stopped on the copyboard glass.
F-2-67
[2] [1]
[2]
[1]
J1
J2
J5
J3
J6 J7 J8 J9 J10
J16 J15
J11
J14
IC8
J13
J12
J4
CB1
SW1
DSP1
SW4SW3SW2