Canon DADF-R1, Руководство по обслуживанию

Страница: 132 / 222

Chapter 4
4-8
4.4.2.2 Removing the Reversing Roller
0013-3560
1) Remove the 2 screws (M3X4) [1] and (M3X6) [2]
of the pickup front side plate , and disconnect the
connector [3]; then, detach the pre-reversal
solenoid unit [4].
F-4-30
2) Remove the 2 screws [4], and detach the reversing
guide [5].
When mounting the reversing guide, do so while
forcing it in the direction of the arrow. If not properly
mounted, it can trigger jams.
F-4-31
3) Remove the reversing roller.
3-1) Remove the E-ring [2], gear [3], and parallel pin
[4] on the rear side plate side of the reversing
roller [1] (2 pc.).
F-4-32
The gear holds a pin. Take care not to lose it when
removing the gear.
3-2) Remove the grip ring [2] and the bearing [3] on
the front side plate side of the reversing roller
[1] (2 pc.).
F-4-33
[3]
[1]
[2]
[4]
[4]
[4] [5]
Only when mounting it.
[2]
[2] [3]
[3]
[4]
[1]
[1]
[2]
[2]
[3]
[1]
[3] [1]