Canon DADF-G1, Руководство по обслуживанию

Страница: 51 / 154

COPYRIGHT© 2000 CANON INC. CANON DADF-G1 REV.0 OCT. 2000
CHAPTER 2 OPERATIONS AND TIMING
2-34
Caution:
EX:
F02-210-02
When a jam occurs, the host copier knows how many originals it has copied. It sends the
information to the machine so that the machine may forward the originals that have been
copied and start placing originals that have not been copied on the copyboard glass. It is im-
portant to remember that the copying sequence will be affected unless the number of origi-
nals is the same both before and after jam removal.
In the case of error [1] above, the machine and its host copier will stop operation and indi-
cate the presence of a fault; in the case of error [2], however, they continue to operate, re-
quiring care.
2.10.1 Resetting
The machine may be reset by removing all originals from the original tray. Some host
copiers indicate a message. Be sure to check the message and follow the instructions, if any,
to correct the placement of originals.
10 originals are
placed on the
original tray.
The 8th
original jams.
The 10 originals are
put back into initial
order and placed on
the original tray. The 7 originals that have
been copied are counted,
and copying is started with
the 8th original.
3rd original jams.
The originals are counted
and copying is started with
the 2nd original.
3 originals are placed
on the original tray.
8 originals are placed
on the original tray.
The originals are counted,
and the DADF is stopped.
(7 originals have
been copied.)
(2 originals have
been copied.)
10 (originals) - 7 (originals that have been copied) = 3 originals
10 (originals) - 2 (originals that have been copied) = 8 originals
Nor
mal
Error
[1]
Error
[2]