Canon DADF-G1 Скачать руководство пользователя

Страница: 3 / 154

Scope of Application

This document is published by Canon Inc. for the purpose of providing individuals with the technical

knowledge needed to install, maintain, and repair the product under discussion. It may also be used as

a reference when studying the technical aspects of the product.

The contents of this document are generic in nature so as to cover all areas where the product is sold.

In this respect, it is important to note that some of the specifications or descriptions found in this

documentation may not apply in some areas.

In addition, it must be borne in mind that the specifications or descriptions may differ from those

noted in the actual machine or found in advertisements or in other printed matter.

All questions concerning this document are to be addressed to the Service Department of the

appropriate Sales Company.

Revision

The information disclosed in this document may not necessarily be accurate because of updates

made to the product, and major differences will be communicated in the form of technical bulletins.

The following will not apply where it does not conform to the laws or regulations of the country in which

the product is used.

Trademarks

The product names and company names found in this document are registered trade marks or trade

marks of their respective companies.

The title to this document belongs to Canon Inc., and no part of it must be reproduced, quoted, or trans-

lated into another language without the consent of Canon Inc. in writing.

Warning

This document must be handled with utmost care. Disclosure of its contents may lead to legal proceedings.

Printed in Japan

Imprimé au Japon

Содержание DADF-G1


















































































































































Результаты поиска

Содержание DADF-G1

Отзывы:

Похожие инструкции для DADF-G1

Бренды по названию

Популярные бренды

Canon DADF-G1, Руководство по обслуживанию

Результаты поиска

Содержание DADF-G1

Отзывы:

Похожие инструкции для DADF-G1

Бренды по названию

Популярные бренды