Canon DADF-G1, Руководство по обслуживанию

Страница: 29 / 154

COPYRIGHT© 2000 CANON INC. CANON DADF-G1 REV.0 OCT. 2000
CHAPTER 2 OPERATIONS AND TIMING
2-12
The host copier uses the results of detection made by the machine (i.e., lengths in vertical
and horizontal directions) to identify the size of a specific original in terms of a default size.
An original may be identified as being one of the following default sizes:
d. A-Configured DADF, A/B-Configured DADF
Default size Vertical length Original width
B5R 257 mm 177 to 187 mm
A5 148.5 mm 205 to 215 mm
A4R 330 mm 205 to 215 mm
FOOLSCAP 330 mm 205 to 215 mm
B5 182 mm 252 to 262 mm
B4 364 mm 252 to 262 mm
COMPUTER paper 381 mm 274 to 284 mm
A4 210 mm 292 to 302 mm
A3 420 mm 292 to 302 mm
T02-203-01
Each default size allows a margin of ±10 mm in vertical direction and ±5 mm in horizon-
tal direction; a size falling outside will be identified as being a non-default size.
e. Inch-Configured DADF
Default size Vertical length Original width
STMT 140 mm 211 to 221 mm
LTRR 279 mm 211 to 221 mm
FOOLSCAP 330 mm 211 to 221 mm
LGL 356 mm 211 to 221 mm
LTR 216 mm 274 to 284 mm
COMPUTER paper 381 mm 274 to 284 mm
279 mm
×
432 mm (11”
×
17”) 432 mm
T02-203-02
Each default size allows a margin of ±10 mm in vertical direction and ±5 mm in horizon-
tal direction; a size falling outside will be identified as being a non-default size.