Canon CXDI-50G, Руководство по обслуживанию

Страница: 63 / 179

2. Installation Manual
- 49 -
Parameter List (Separate Document 2)
DICOM printer
In the CXDI, DICOM printers are administered separately according to printer product.
The transfer software module is “print_stuff”. The settings for these parameters are described below.
Parameter Meaning Description
-C copies
This parameter uses a
number to designate the
number of copies.(1/2/...) * This parameter is used in the
DICOM Basic Film Session
(2000, 0010).
* When the number of copies
is designated, film sheets are
printed in the quantity
specified in a single printing
operation.
* This parameter is necessary
when printing multiple
sheets for a single data
transfer operation.
* This parameter is set according to the
user’s requirement.
* In the DICOM library TYPE3, the value
is transferred together with the Tag.
However, if the value is unknown, the
value is either is transferred as a
character string with length 0, or the
element itself is not transferred.
Æ The printer default values are used if
this parameter is not entered.
-y priority
Priority in the DICOM
printer
(HIGH/MED/LOW) * This parameter is used in the
DICOM Basic Film Session
(2000, 0030).
* This parameter determines
where this transfer image is
inserted into the queue in the
DICOM printer. At HIGH,
the image is printed first
among the queued images.
* This parameter is set according to the
user’s requirement.
* In the DICOM library TYPE3, the value
is transferred together with the Tag.
However, if the value is unknown, the
value is either transferred as a character
string with length 0, or the element itself
is not transferred.
Æ The printer default values are used if
this parameter is not entered.
* Note this parameter does not determine
where this transfer image is inserted into
the CXDI queue.
-D destination
Film destination
(MAGAZINE/PROCESS
OR/BIN_i) * This parameter is used in the
DICOM Basic Film Session
(2000, 0040).
* Film is sent to the output
device designated by
RECEIVE MAGAZINE or
the automatic developer.
Æ The printer default values are used if
this parameter is not entered.
* The film is usually discharged to the
default output device.
-F film type
Film media type (“BLUE
FILM” / “CLEAR FILM”
/ “PAPER”) * This parameter is used in the
DICOM Basic Film Session
(2000, 0030).
* Film is printed as the
designated film type.
Æ
The printer default values are used if
this parameter is not entered.
* Although many types of films cannot be
detected, the film type can be selected in
the KELP2180.
* In this parameter, be sure to put
quotation marks (“ ”) around 0x20 since
it comes between BLUE and FILM.