Canon CXDI-50G, Руководство по обслуживанию

Страница: 101 / 179

2. Installation Manual
- 87 -
5.8
Post-installation checks
1) Check sheet
Checkpoint Checkpoint details Check
Align the unit with the X-ray tube †
Checking the imaging unit
Check that the unit does not interfere with the
cables.
†
Set the date.
†
Set the time.
† Checking the date and time
Set the time zone.
†
Checking the software version
Check that the CXDI application, firmware and
PLD code versions all match.
†
Identifying and registering the
imaging units
Register the serial numbers of the sensors †
Inputting the control PC serial
number
Input the serial number of the control PC to be used. †
Set the contrast.
†
Set the brightness. † Checking the operation unit
Set the gamma correction. †
kV †
mA †
Checking the exposure
condition table
msec or mAs
†
Checking the annotation
Check that the setting have been made in
accordance with the customer’s request.
†
IP address †
Subnet mask † Network connections
Default gateway †
Perform calibration. †
Preparations prior to exposure
Perform self-test.
†
Checking image transfer to
printers and storages Check that the setting have been made in
accordance with the customer’s request.
†
Checking image transfer to
external memory device
Check that the image is transferred properly. †
Checking the image quality
Use SMPTE pattern to check the density on a linear
chart.
Check that there is no artifacts, shading, etc.
†
dtque †
dtstore †
dttmp †
old †
Deleting unnecessary data
(there must be no unnecessary
data such as the images used
for testing)
Windows XP trash box
†
Operate from the Windows XP desktop. †
Checking the window displays
(no unnecessary windows must
appear; the same applies after
rebooting)
Taskbar
†