Canon CR-X300, Руководство пользователя

Страница: 57 / 114

57
[Bit Rate Control]
Settings for the video bit rate.
In order to control the bit rate strictly such as in an environment subject to the bandwidth limitations, set to [CBR].
[Target Bit Rate (Mbps)]
Enter the target value of the bit rate when [Bit Rate Control] is set to [CBR].
Enter a bit rate as an image quality reference when [Bit Rate Control] is set to [VBR]. Depending on the video, the set bit
rate may be exceeded.
The maximum value that can be entered differs depending on the settings of [Video Size] and [Framerate (fps)].
[I Frame Interval (sec.)]
Select the interval (sec.) to insert an I frame into the video selected in [Video Codec]. Specify [ALL-I] if wanting all frames to
be I-frames.
Note
When [Video Codec] is set to [H.265], [ALL-I] cannot be set.
Substream 1
Settings for the video of Substream 1 to be distributed from the camera.
[Video Codec]
Fixed to H.264.
[Video S ize]
Fixed at 640 x 360.
[Framerate (fps)], [Bit Rate Control], [Target Bit Rate (Mbps)], [I Frame Interval (sec.)]
Refer to each item of [Mainstream].
Note
[Framerate (fps)] of Substream 1 cannot be set to [59.94] or [50.00].
Substream 2
Displays the set value for the video of Substream 2 to be distributed from the camera.
[Video Codec]
Fixed to JPEG.
[Video S ize]
Fixed at 120 x 720.
[Framerate (fps)]
The set value is displayed according to the frame frequency.