Canon CR-X300, Руководство пользователя

Страница: 50 / 114

50
The preset is saved to the camera and displayed in the list as follows:
Note
• [home] is the setting when the camera was launched (home position). It can be overwritten but cannot be deleted.
• Able to register up to 100 presets (including home position) in the camera.
Calling Presets
Select the preset to call from the list and click [View] to reflect the preset settings on the camera.
Confirm in the video display area.
The time or speed at which the camera moves to the pan/tilt/zoom position can be specified in the [Speed Mode]. Click
[Time] or [Speed Level] and adjust the value with the slider, and then click [View].
Note
• If the pan/tilt/zoom or focus of the camera is operated while a preset is running, the preset stops. However, another preset can be called
while a preset is running.
• If [Stop] is clicked while a preset is running, the preset stops.
• Depending on the relationship between the pan/tilt/zoom position before the call and the registered pan/tilt/zoom position, and the [Time]
setting, it may not operate within the set time.
• Camera settings other than the pan/tilt/zoom position are reflected immediately when [View] is clicked.
• Presets cannot be called while the washer is in operation. Call the preset after the washer operation stops.
Deleting Presets
Select the preset to delete from the list and click [Delete] to delete it from the camera.
4
Repeat steps 2 to 3 to register multiple presets.