Canon CR-X300, Руководство пользователя

Страница: 9 / 114

9
use or installation of this product, whether or not the installation of this product was by you, or by any third
party.
Privacy:
• Do not install this product in areas where people have a reasonable expectation of privacy, including but not
limited to, bedrooms, dressing rooms, locker rooms and rest room facilities.
• Some jurisdictions require signage disclosing the existence of camera equipment. Please check your own area’s
laws for requirements.
• Making audio recordings is heavily regulated and can vary significantly by area. Please check laws in your
jurisdiction before making any audio recordings.
OTHER IMPORTANT INFORMATION: Please see other important information pertaining to the use of this product by
reading our User Manual, which can also be found at global.canon/ncsp, prior to using this product.
Trademarks
• Microsoft, Windows and Microsoft Edge are trademarks or registered trademarks of Microsoft Corporation in the United
States and other countries.
• Windows is legally recognized as the Microsoft Windows Operating System.
• Safari is a trademark of Apple Inc.
• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
• HDMI is a trademark or registered trademark of HDMI Licensing Administrator, Inc. in the United States and other
countries.
• NDI is a trademark or registered trademark of NewTek, Inc. in the United States and other countries.
• All other company or product names used in this document are trademarks or registered trademarks of their respective
holders.
Software License Agreement
For the software license agreement, refer to the text file provided with the software and installer.
Third Party Software
This camera contains third party software modules. Confirm each module's license conditions in [System] > [Maintenance]
> [General] > [Tool] > [See Third Party Software License Conditions] on the Settings Page.
S oftware Licensed Under the GPL and LGPL
If you would like to acquire the source code licensed under the GPL and LGPL, please contact us using one of the following
methods:
(1) To receive an e-mail with the URL to download the source code,
access <https://global.canon/en/oss/scd/index.html> and complete the request form; or
(2) To receive the source code by post,
send us a letter in writing to the address below with the following information.
In the case you have chosen (2), WE MAY CHARGE YOU for the delivery cost.
(i) Your Address (Country/Region, ZIP code, Address, Your name) [mandatory]
(ii) Your e-mail address (for the purpose of possible communication with us) [optional]
(iii) Product Name/Application Name [mandatory]
(iv) Product/Application Software Version [optional]
If you do not specify a version, we will send source code corresponding to the latest version.
Except as expressly permitted by the law in effect in the jurisdiction in which you are located, you shall not reverse
engineer the firmware which is contained in this product ("Firmware") and you shall not modify the Firmware. TO THE FULL
EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EITHER CANON, OR CANON’S LICENSORS BE
LIABLE FOR ANY DAMAGES WHATSOEVER ARISING OUT OF USING THE FIRMWARE. The Firmware may contain third
party software components. Notwithstanding anything contained herein to the contrary, the terms and conditions of such
third party software components shall be applied to your usage of the Firmware.