Canon CR-180 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 76

Canon CR-180 Скачать руководство пользователя страница 32

28

Chapter 3

Software

About the Software

The following software applications are provided on the setup disc that is
packaged with the scanner. Be sure to open and read the Readme.txt file on the
setup disc before installing the software.

●

Scanning Utility for the CR-180

This utility software is a dedicated software application for the CR-180.
A dedicated scanner driver is installed after you install the utility software.

●

ISIS/TWAIN driver

This scanner driver should be used with ISIS (Image and Scanner Interface
Specification) compatible or TWAIN (Technology Without Any Interested Name)
compatible software. Install it, only if it is required.

●

The ISIS/TWAIN driver provided with the scanner does not necessarily operate all

ISIS compatible or TWAIN compatible applications. Contact your software dealer or

service representative for further information.

●

Some functions mentioned in this manual may not be operated in some applications.

Important

«
...
30
31
32
33
34
...
»

Содержание CR-180













































































Отзывы:

Нет отзывов