Canon CR-180 Скачать руководство пользователя страница 20

Страница: 20 / 76

Chapter 2

Preparation Before Use

Checking Your Operating
Environment

Your computer system must meet the following conditions to use the CR-180.

●

IBM PC/AT or compatible machines that meet the following
specifications:

• Intel Celeron 733 MHz or faster
• 256 MB main memory or more (recommended)
• 100 MB or more free space on the hard disk

●

SCSI card that is compatible with this scanner or Hi-Speed USB 2.0
interface card (See “USB 2.0 Interface Cards,” on p.19.)

●

Monitor that can display a resolution of 1024 x 768 (XGA) or greater is
recommended.

●

One of the following operating systems:
For SCSI

• Microsoft Windows 95 OSR2
• Microsoft Windows 98SE
• Microsoft Windows Me
• Microsoft Windows NT 4.0 Workstation SP6
• Microsoft Windows 2000 Professional SP4
• Microsoft Windows XP SP1

For USB

• Microsoft Windows 98SE
• Microsoft Windows Me
• Microsoft Windows 2000 Professional SP4
• Microsoft Windows XP SP1

●

Either an ISIS (compatible) or a TWAIN (compatible) application that
operates on one of the operating systems noted above.

●

Use the latest USB 2.0 driver when using USB connections. Contact your local

retailer for details.

●

If the CPU, memory, SCSI card, or USB interface card does not meet the

recommended specifications, the scanning speed may slow down, or the time

required to transfer data may increase.

Important

Содержание CR-180













































































Результаты поиска

Содержание CR-180

Отзывы:

Canon CR-180, Инструкция по эксплуатации, Страница: 20 / 76

Результаты поиска

Содержание CR-180

Отзывы: