manualshive.com logo in svg

Canon Colorado 1650, Руководство по эксплуатации

Поделиться
Скачать
Canon Colorado 1650 Скачать руководство пользователя страница 374

• Caution: Canon Production Printing does not accept any liability for any damage or

consequences, if the batteries are removed by persons other than Canon Production Printing
service personnel.

Battery labeling (Taiwan)

Translation: Waste batteries, please recycle.

Battery labeling (United Kingdom; England, Scotland and Wales)

• This product contains a battery. Please do not remove the battery. If the battery needs

replacement, this should be done only by skilled service technicians who are aware of the
removal instructions provided by Canon Production Printing.

• This symbol indicates that the batteries and accumulators used in this product are to be

disposed of separately from your household waste in accordance with the UK Waste Batteries
and Accumulators Regulations.

If a chemical symbol is printed beneath the symbol shown above, in accordance with the
Regulation, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is
present in this battery or accumulator at a concentration above an applicable threshold
specified in the Regulation. Batteries and accumulators must not be disposed of as unsorted
municipal waste. Users of batteries and accumulators must use the available collection
framework for the return, recycling and treatment of batteries and accumulators. If your Canon
Production Printing product contains non-removable batteries, the entire product is already
covered by the UK Waste Electrical and Electronic Equipment Regulations and should be
handed over to an authorized collection site for WEEE. The collection site will then take the
appropriate measures for the recycling and treatment of the product, including the batteries.
Customer participation in the collection and recycling of batteries and accumulators is
important to minimize any potential effects of batteries and accumulators on the environment
and human health due to substances used in batteries and accumulators. In the UK, there are
separate collection and recycling schemes for batteries and accumulators. To find out more
about recycling schemes for batteries and accumulators available in your area, please contact
your local city office, waste authority or waste disposal facility. For more information regarding
the return and recycling of waste batteries and accumulators, please visit: 

http://www.canon-

europe.com/sustainability/approach

374

Chapter 10 - Regulation Notices

Содержание Colorado 1650

































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды