Canon Colorado 1650, Руководство по эксплуатации

Страница: 370 / 384

Grounding (Finland; FI, Norway; NO, Sweden; SE and Denmark; DK)
• FI: Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
• NO: Apparatet må tilkoples jordet stikkontact.
• SE: Apparaten skall anslutas till jordat uttag.
• DK: Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til
stikproppens jord.
Translation: The machine must be connected to a grounded power outlet.
Radio Interference suppression (all countries except USA)
• Warning (CISPR22): This equipment is compliant with Class A. In a residential environment this
equipment may cause radio interference.
• Warning (CISPR32/EN55032): This equipment is compliant with Class A of CISPR 32. In a
residential environment this equipment may cause radio interference.
• Warning (CISPR11/EN55011): Operation of this equipment in a residential environment could
cause radio interference.
Flicker (EEA including Switzerland)
• This equipment may only be connected to mains connections with an impedance at 50 Hz of
Zsys =
0.305 Ohm
or less. In case it is observed that this equipment causes 'light flicker' to the
environment, contact the supply authority in order to verify if the mains network has lower
impedance than the one specified above.
FCC (USA)
• This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the User Documentation, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
• Uses of shielded cables are required to comply with Class A limits in Subpart B of Part 15 of
the FCC Rules.
• This equipment contains a certified modular transmitter. The transmitter’s FCC ID label is
located near the power rating label. The modular transmitter is located in the ink supply unit
and can only be accessed by a service technician.
ICES/NMB; Interference-causing equipment (Canada)
• CAN ICES-3 (A)/NMB-3(A)
Conformity declaration for Radio Equipment Directive; RED (EEA including Switzerland)
• Hereby Canon Production Printing declares that the printer is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU (RED). The product is CE-
marked to show conformance with applicable legal requirements.
Conformity declaration for Radio Law (Japan)
• This end device contains a radio device which is already approved by MIC
AC-17014
for Radio
Law
370 Chapter 10 - Regulation Notices