manualshive.com logo in svg

Canon Colorado 1650, Руководство по эксплуатации

Поделиться
Скачать
Canon Colorado 1650 Скачать руководство пользователя страница 371

Conformity declaration for Radio devices (USA and Canada)

• This equipment contains a certified modular transmitter. The modular transmitter is located in

the 

ink supply unit

 and can only be accessed by a service technician.

• The transmitter’s FCC ID is 

2AGNM

, the IC ID is 

22117

.

Conformity declaration for Federal Telecommunications Law (Mexico)

This end device contains an RFID module which is already approved by IFETEL
(RCPOCOC16-1941) for Federal Telecommunications Law.

Conformity declaration for Telecommunications (Hong Kong)

This end device contains an RFID module which is already approved by ISM (HKCA1035, issue 7)
for the Communications Authority. Certificate No.: HK0011801838.

Conformity declaration for Telecommunications (Malaysia)

This end device contains an RFID module which is already approved by MCMC MTSFB (TC
T007:2014) for Communications and Multimedia Act. Approval No.: RCCV/24A/0418/S(18-1613).

Conformity declaration for Telecommunications (Singapore)

This end device contains an RFID module which is registered with the Info-communications
Media Development Authority under regulation 20(6) of the Telecommunications (Dealers)
Regulations (Cap 323, Rg 6) (the "Dealers Regulations") and approved for sale in Singapore.
Telecommunications (Amendment) Act 2011 (No. 19 of 2011).

Conformity declaration for Telecommunication (Indonesia)

This end device contains an RFID module which is certified by the ministry of communications
and information technology, directorate general of resources and equipment for post and
information technology, the republic of Indonesia. Telecommunication Law No.36 of 1999.

Chapter 10 - Regulation Notices

371

Содержание Colorado 1650

































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды