manualshive.com logo in svg

Canon Colorado 1650, Руководство по эксплуатации

Поделиться
Скачать
Canon Colorado 1650 Скачать руководство пользователя страница 18

Safety and Environment Information

Important Safety and Environment User Information

Before using your printing system, make sure that it is properly installed and that you have read
and understand the User Documentation in order to operate the system safely and in accordance
with its functional offerings. When using your machine make sure to always comply with the
User Documentation.

Warning and caution indicators

In order to warn and make aware all persons operating the machine of possible risks, dangers
and/or hazards, safety warning labels have been applied where required. For safe operation it is
important to understand the meaning of every label. Make sure you read and understand all label
descriptions before you start operating the machine.

In order to avoid potential hazards, make sure that preventive and remedial maintenance is
executed by skilled persons and/or service technicians only.

Disclaimer:

CANON PRODUCTION PRINTING MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THE
CONTENTS OF THIS PUBLICATION, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED
HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-
INFRINGEMENT. CANON PRODUCTION PRINTING SHALL NOT BE LIABLE FOR ANY DIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES
RESULTING FROM THE USE OF THE CONTENTS OF THIS PUBLICATION.

Canon Production Printing reserves the right to revise this publication and to make changes from
time to time in the content hereof without obligation to notify any person of such revision or
changes.

The websites of the regional Canon sales offices are listed on the cover of the User
Documentation. There you can find the addresses of the local Canon sales offices.

Canon Production Printing and its suppliers may collect, combine and use non-personal machine
and (individual) user information and data you provide using the machine. Information on what
type of information and data is retrieved or received and how access or entry to such information
and data by Canon Production Printing and its suppliers is secured please visit Canon Production
Printing Terms of Use and Privacy Statement at 

https://cpp.canon

.

Notes

• In some regions where this product is sold the following product name(s) may be registered as

model number(s).

Product name

Model number

Colorado 1650

Océ 01079

RFID Reader

Océ 01087

• Depending on the context, the terms “printer”, “system”, “machine”, and “equipment” used

in the User Documentation mean the printing system for which this User Documentation shall
apply.

• Some consumables and materials designated to be used by this machine are accompanied

with Safety Data Sheets. Please refer to the corresponding Safety Data Sheets for specific
Safety and Environment information and operating instructions. You may download the actual

Safety and Environment Information

18

Chapter 2 - Safety information

Содержание Colorado 1650

































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды