manualshive.com logo in svg

Canon Color Bubble Jet BJC-5000 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon Color Bubble Jet BJC-5000 Series Скачать руководство пользователя страница 63

Part 3: Operating Instructions

BJC-5000

3-13

2. TRANSPORTING THE PRINTER

To carry or transport the printer, keep the BJ cartridge installed in the printer or stored
in the BJ cartridge container.  This will prevent printing defects caused by ink leakage or
dried out ink on the nozzles of the BJ cartridge.

2.1  Carrying the Printer

Follow the procedure below to move the printer.
1) Press the 

POWER button 

to turn off the printer.  When the power is turned off, the

indicator 

goes out.

2) Disconnect the interface cable.
3) Unplug the AC power cord from the AC outlet.
4) Make sure that the BJ cartridge is at the capping position (the right end of the

printer).  If the cartridge is not at the capping position, move the carriage to the
capping position by hand.  (See 

“Part 5: 4.2.3 Unlocking the carriage lock” on page 5-6

for

details on the manual capping method.)

Never turn off the printer by unplugging the AC power cord without first
pressing the 

POWER button

. Otherwise, the printer is turned off before it

can cap the BJ cartridge.  Also, do not carry a BJ cartridge removed from
the printer by itself.  If the BJ cartridge is not capped, the ink may leak or
dry out in the nozzles.

2.2  Transporting the Printer

Follow the procedure below to transport the printer.
1) Disconnect the interface cable and unplug the AC power cord as described in 2.1,

“Carrying the Printer.”

2) Make sure that the carriage is locked at the capping position (the right end of the

printer).  If the carriage is not at the capping position, move the carriage to the
capping position by hand (See 

“Part 5: 4.2.3 Unlocking the carriage lock on page 5-6

for

locking of the carriage.)

3) Repack the printer in its original box and packing materials.

If the original packing materials are not available, use a sufficient amount
of shock-absorbent material to pack the printer.

CAUTION

NOTE

Figure 3-14  Carriage Capping Position

Содержание Color Bubble Jet BJC-5000 Series


































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды