manualshive.com logo in svg

Canon Color Bubble Jet BJC-5000 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon Color Bubble Jet BJC-5000 Series Скачать руководство пользователя страница 30

1.2  Features

1. High-speed printing by dual cartridge system
2. High-resolution printing of maximum 1440 (vertical) x 720 (horizontal) dpi
3.  Easy-to-replace, high-speed and high-quality printing-compliant BJ cartridge

Color BJ Cartridge (BC-21e): Adopts a drop modulation technology.  Has separate

ink tanks (Bk) (Y+M+C) and head with 136 nozzles in a
vertical line; 64 nozzles (Bk) + 24 nozzles x 3 (Y, M, C).

Black BJ Cartridge (BC-23): 128-nozzle and head single unit type (high-density

type)

Photo BJ Cartridge (BC-22e Photo): Drop modulation technology has been adopted.

136-nozzle and head single unit type

Black BJ Cartridge (BC-20 [reference]): 128-nozzle and head single unit type
Ink cartridge: Black ink cartridge and tricolor (Y, M, C) ink cartridge (3-color ink

single unit)

(The previous model Color BJ Cartridge (BC-21) and Photo BJ Cartridge (BC-22
Photo) that are not compliant with the drop modulation technology cannot be
used.)

4. The auto-alignment function which corrects the printing position displacement of

the left and right cartridges and printing direction displacement caused by bi-
directional printing has been provided to achieve image maintenance.

5. Exclusive Windows machine using a dedicated driver.  Emulation is not supported.
6. A BJ cartridge container is supplied with the printer for storing the removed BJ

cartridge.

7. ECP mode compliant.
8. Banner printing capabilities.
9. Built-in automatic cut sheet feeder without paper lever.
10. Improved operability.  Provides an automatic head-to-paper distance adjustment

mechanism (no paper thickness adjustment lever).  Also, the cartridge comes to the
replacement position when the cover is opened (no cartridge button).

11. Built-in AC adapter for power supply.  (Assembled at the factory before shipment.)
12. Can print on up to A3-size paper by manual feed.  (Up to A4/LTR-size full bleed

with ASF.)  When printing on A3-size paper, only the left BJ cartridge is used.
(Either monochrome or color printing is enabled and photo printing is disabled
when using A3-size paper.)

13. The printer driver supports an automatic power off feature.
14. The printer can achieve high resolution printing because the main data processing

is performed by the printer driver.  Note on the other hand that this printer
requires a more advanced host computer operating environment.
1) Windows95/98
2) CPU:  Min. 166MHz
3) RAM:  Min. 16MB
4) HDD:  Min. 40MB of free space
5) Printer port:  ECP/DMA

2-2

Part 2: Product Specifications

BJC-5000

Содержание Color Bubble Jet BJC-5000 Series


































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды