Canon Color Bubble Jet BJC-5000 Series, Руководство по обслуживанию

Страница: 128 / 161

Part 5: Maintenance
BJC-5000
5-10
5.3.2 Adjustment
1) Place the gap gauge at position B.
2) Move the carriage to position B.
3) Gradually loosen screw A until the carriage guide frame moves forward under its
own weight using screw B as a pivot.
4) Lightly push the screw A end of the carriage guide frame once or twice and check
that the carriage guide frame pivots around the screw B as indicated by arrows in
Figure 5-9.
If it does not return to the original position, you have fixed screw B too tight. If
the screw B end moves as well, then screw B is too loose. Fix the carriage guide
frame lightly again and repeat the procedure from step 1).
5) Lightly fix screw A.
6) Lightly push the screw A end of the carriage guide frame once or twice and check
that the carriage guide frame moves around screw B as shown by the arrows
figure 5-9.
If it does not return to the original position, screw B is too tight. And if the screw
B end moves as well, then the screw B is too loose. Refasten the carriage guide
frame lightly again and repeat the procedure from
step 1) .
Nozzle Section
Position B
Position C
Grade Difference
Paper Guide
Gap Gauge
Carriage Belt
Screw B
Carriage Guide Frame
Screw A
Position C
Position A
Position B
Figure 5-8 Head Gap Adjustment (1)