Canon Color Bubble Jet BJ3000U Series, Руководство пользователя

Страница: 354 / 514

354 Troubleshooting
Printer Does Not Start or Stops Mid-Job
■
Printing halts
The printer stops printing before the print job is complete.
C
HECK
1 I
S THE PRINT JOB A FINELY DETAILED PHOTOGRAPH OR
ILLUSTRATION
?
The printer requires more time to process a finely detailed illustration or
photograph.
Check the POWER light. If the POWER light flashes green, the computer
is sending print data to the printer and the job is executing normally.
If the print job requires a large amount of black ink on plain paper, the print
job may require more time.
C
HECK
2 H
AS THE PRINTER BEEN OPERATING FOR A LONG TIME
?
The print head may occasionally overheat during a long print job.
If the print head overheats, printing pauses at the end of a pass across the
page to allow time for the print head to cool and then restarts after a brief
interval. Interrupt printing at a convenient point, turn the printer off, and
wait for at least 15 minutes for the print head to cool.
If the printer overheats while printing a densely colored photograph or
illustration, the printer may beep and stop printing to protect the print
head. In this case, you cannot continue printing. Turn the printer off and
wait at least 15 minutes for the print head to cool.
To avoid minor burns, never touch the print head or the surrounding area.
Caution