manualshive.com logo in svg

Canon CLBP-460PS, Руководство по обслуживанию

Поделиться
Скачать
Canon CLBP-460PS Скачать руководство пользователя страница 41

• CONFIGURATION
• TEST PAGE
• PS FONT LIST
• PCL FONT LIST
• JOB LOG (only when the optional hard disk is installed)
• MENU HELP

See page 4-7 for details of test prints.

3. RESET menu

The RESET menu allows the user to clear jobs in the queues, format the hard disk, reset values
in the SETUP menu to the default values and restart the printer.

Press the ENTER key after selecting “YES” or “NO” using the up and down arrow keys to exe-

cute the items in the RESET menu and to go to the next menu.  Press the MENU key to go back
to the RESET menu.

• CLEAR LOG/QUEUES:

Allows the user to clear all jobs in the queues and the job log.  (only when the optional hard
disk is installed)

• FORMAT DISK:

Allows the user to format the hard disk of the printer. (only when the optional hard disk is
installed)

• RESET COLOR:

Allows the user to reset the values in “VISUALCAL” and “COLOR ADJUSTMENT” to the
default values.

• RESTORE DEFAULTS:

Allows the user to reset all values in the SETUP menu to the default values.

• RESTART PRINTER:

Allows the user to restart the printer in order to reboot the video controller.  (In case of
restarting the printer, the printer restarts from the warm-up initial drive in the WAIT peri-
od.)

1 - 31

CHAPTER 1

Содержание CLBP-460PS























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды