Canon 2000 Скачать руководство пользователя страница 246

Страница: 246 / 381

G3 FACSIMILE COMMUNICATIONS

5–104

6.6

Method for Detecting Image Signal Transmission

Errors

Although image signals are sent after equalizing the MODEM and train-

ing, a transmission error may occur when sudden noise or an instantaneous

power interruption is generated during image signal transmission. To

detect whether a transmission error has occurred in the image signal on the

receiving side, the number of bits in each line after decoding is compared

with the specified number of bits according to the document size (1728

bits for A4). If the number of bits match, then it is judged that there is no

transmission error. If they do not match, it is judged that something has

caused a transmission error.

6.6.1 When there are no errors in the received image

The receiver returns the MCF that shows that the image was received suc-

cessfully.

6.6.2 When errors are detected in the received image

When an transmission error has occurred on the receiving side, all of the

data to be recorded for that line is lost. However, with a regular image, the

omission of several lines will not greatly affect the image. For this reason,

a reference is provided and occurrence of an error of a fixed amount is

counted as the record of the error. If the error occurs at this reference or

less, it is judged that the image was received successfully. In this case, the

lines for which the error occurred are not printed, and the next line is

printed. Note, however, that some facsimiles have a function for selecting

re-printing of the previous line.

6.6.3 RTN and RTP

When an error has occurred in excess of the fixed amount in the received

image, the receiving side returns the RTN instead of the MCF. This means

that that page could not be received successfully. When RTN is received,

an error occurs on the transmitting side, and communications is ended if

there are no more documents. If the next document is present, DCS is

returned to and a fallback is caused to enable transmission of the next doc-

ument. On facsimiles transmtting by memory transmission, a fallback to

the document that was in error can also be made to transmit the document.

If the number of occurrences is at the reference or less, if an error has

occurred, the RTP is returned instead of RTN. In this case, that page is

regarded as a successfully received page. However, to transmit documents

Содержание 2000





























































































































































































































































































































































































Результаты поиска

Содержание 2000

Отзывы:

Похожие инструкции для 2000

Бренды по названию

Популярные бренды

Canon 2000, Руководство по обслуживанию

Результаты поиска

Содержание 2000

Отзывы:

Похожие инструкции для 2000

Бренды по названию

Популярные бренды