Trouble?
95
Ad
di
tio
nal In
for
mati
on
E
NO DISC
No disc is loaded. Insert a disc.
22
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
101
You inserted a disc recorded in a different Television System
(NTSC).
–
LOADING THE DISC
The disc is being read. Wait before you start recording.
–
AVOID MOVING THE
CAMCORDER
Try not to move the camcorder while the image is being recorded.
–
UNABLE TO RECOVER
DATA
Could not recover a corrupted file.
–
This message can also appear if condensation has formed. If you
suspect condensation is the reason, do not initialize the disc and
wait until the camcorder dries completely before resuming use.
101
DISC FULL
The disc is full (“
END” flashes on the screen) . Delete some
recordings (DVD-RW in VR mode) to free some space or replace
the disc.
22
62
NO CARD
Memory card not is inserted into the camcorder.
22
NO IMAGES
No images are recorded on the memory card.
–
CARD ERROR
A memory card error occurred. The camcorder cannot record or
display the image.
The error may be temporary. If the message disappears after 4
seconds and “
” flashes red, turn the camcorder off, remove the
card and reinsert the card. If “
” changes to green, you can
continue recording/playback.
–
CARD FULL
Memory card is full. Erase some images to free some space or
replace the memory card.
66
NAMING ERROR
The folder and file numbers have reached their maximum value.
Set the [FILE NOS.] option to [RESET] and initialize the disc or
memory card, erase all the images on the memory card or replace
the disc.
–
UNIDENTIFIABLE IMAGE
The image file is corrupted or it was saved using a compression
method other than that compatible with this camcorder (JPEG).
–
TRANSFER ORDER
ERROR
You attempted to set more than 998 transfer orders.
83
TOO MANY STILL IMAGES
DISCONNECT USB CABLE
Disconnect the USB cable and decrease the number of still images
on the memory card or disc to less than 1800. Images cannot be
erased from a DVD-R/DVD-R DL or DVD-RW disc recorded in
VIDEO mode.
If a dialog appeared on the computer screen, close it and then
reconnect the USB cable.
–
Message
Explanation
