Canon 1188B001 страница 94 Скачать руководство пользователя

Страница: 94 / 110

Trouble?

REACHED THE MAXIMUM
NUMBER OF SCENES

The maximum number of scenes has been reached. Delete some
recordings (DVD-RW in VR mode) to free some space or replace
the disc.

22
62

CANNOT PLAY DISC

The disc is dirty or you attempted to play back a disc type not
supported (not DVD-R/RW).

–

This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.

101

CANNOT EDIT DISC

There are no scenes to edit or the recording is damaged.

–

This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.

101

CANNOT DIVIDE THE
SCENE

Photomovie scenes cannot be divided.

You may not be able to divide very short scenes.

–

Scenes cannot be divided when the disc already contains 999
scenes.

–

You may not be able to further divide scenes shorter than 5
seconds that were created by dividing a previous scene.

–

PLEASE USE ONLY THE
RECOMMENDED DISCS

The dual layered disc you inserted cannot be used with this
camcorder.

DISC IS FINALIZED
CANNOT RECORD

You cannot record additional scenes on a finalized DVD-R/
DVD-R DL disc.

–

You cannot record additional scenes or unfinalize a DVD-RW disc
in VIDEO mode that was finalized with another digital device.

–

UNFINALIZE THE DISC

You cannot record additional scenes or convert still images to a
Photomovie scene on a finalized DVD-RW in VIDEO mode.
Unfinalize the disc first.

DISC IS PROTECTED

The disc is protected. Replace the disc or remove the disc
protection.

CANNOT READ THE DISC
CHECK THE DISC

Disc could not be read. Try cleaning it or replace the disc.

This message can also appear if the camcorder has exceeded its
operational temperature. Disconnect the power adapter and
remove the battery and let the camcorder cool down before
resuming use.

–

This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.

101

The disc may not be loaded correctly. Try removing the disc and
reinserting it.

• ACCESS ERROR
• DISC ACCESS FAILURE
CHECK THE DISC

There was an error when reading the disc or attempting to write
onto it. Try cleaning the disc or replace it.

This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.

101

The disc may not be loaded correctly. Try removing the disc and
reinserting it.

DISC COVER IS OPEN

Verify the disc is correctly inserted and close the disc cover.

Message

Explanation

Содержание 1188B001















































































































Результаты поиска

Содержание 1188B001

Отзывы:

Похожие инструкции для 1188B001

Бренды по названию

Популярные бренды

Canon 1188B001, Инструкция по эксплуатации

Результаты поиска

Содержание 1188B001

Отзывы:

Похожие инструкции для 1188B001

Бренды по названию

Популярные бренды