Cannon FITZP, Инструкция пользователя

Страница: 19 / 24

6
1. Plug the power cord into the wall socket and turn on the power
to the heater, see figure 1. Use of an extension cord is not
recommended
2. For control lay-out refer to figure 2
3. To turn heater on press switch to POWER ON position. There
is a 5 second delay before the burner ignites. At this setting the
burner is on LOW and the fan speed is on LOW. Refer
figure 3.
The burner will ignite on both HIGH and LOW settings.
4. To turn burner to HIGH setting, press switch for HIGH setting.
Refer figure 4.
User instructions
Operating instructions
1
2
4
3
19
Wiring diagram
Authorised service agents
For further information or spare parts contact the CANNON
distributor in your state.
Sampford & Staff Pty Ltd
421 Smith Street.
Fitzroy, Vic, 3065
Vic/Tas: (03) 9418 5800
NSW: (02) 9331 8888
SA/NT: (08) 8212 7000
Qld: (07) 3358 3000
WA: (08) 9242 5333
ACT: (02) 6280 4177
Elsewhere: 1800 334 887
email:
service @sampford.com.au