Cannon Tools Neilsen CT2210, Инструкция по эксплуатации

Страница: 10 / 20

8
STEP 2
Insert a Hex Bolt M8X35 with a Flat Washer Φ8 through the hole on hopper, like
the picture b showing. Assemble hitch tube by a nylon lock nut M8. Make sure do
not tighten this lock nut at the moment.
STEP 3
Insert a Hex Bolt M8X35 with a flat washer Φ8 through the hole on the
hopper,like the picture c showing, and assemble the other piece of Hitch tube by
a nylon lock nut M8. The lock nut should not be tightened at this moment.