Cannon Tools Neilsen CT2210, Инструкция по эксплуатации

Страница: 12 / 20

10
STEP 6
1.Put together 2 Hitch Tubes and the Adjustable Handle assembly, and lock them
by the Hex Bolts M6 x 65 , Nylon Lock Nuts M6 and 2pcs of big washer Φ6 like
the picture f showing. The bolts and nuts should not be tightened at this moment.
2. Connect the Control Pole and Adjustable Plate by a Flat Washer Φ8 and a
Nylon Lock Nut M8 like the picture f.
3.Adjust the position between the Hitch Tube, wheel bracket and the hopper,
make sure the control handle can be operated properly and the distance of the
handle in both front and rear should be proper. Then tighten all of the bolts and
nuts from Pic.b to f.