3
in mind the operator or user is responsible for accidents or hazards occurring to
other people or their property.
INSPECT YOUR MACHINE.
Check all bolts, nuts & screws for tightness before
each use, especially those securing guards & drive mechanisms. Vibration
during use, may cause these to loosen. Replace damaged, missing or
failed parts before using. Warning labels carry important information. Replace
any missing or damaged warning labels.
DRESS PROPERLY.
Do not wear loose clothing, gloves, scarfs, neckties
or jewellery (rings, wrist watches), which can be caught in moving parts.Always
wear long trousers. Always wear substantial non slip, substantial or heavy-duty
safety footwear are highly recommended when working. Never operate barefoot
or when wearing sandals. Wear a face or dust mask if the operation is dusty.
Always wear safety glasses/goggles and/or face shields. Everyday eyeglasses
have only impact resistant lenses; they are not safety glasses/goggles. Wear
protective hair covering to contain long hair, preventing it from getting caught in
machinery.
DO NOT OVERREACH.
Keep proper footing and balance at all times
when using the machine. Never stand on the machine. Serious injury could occur
if the machine is tipped or if the moving parts are unintentionally contacted. Do
not store anything above or near the machine, where anyone might stand on the
machine to reach them.
AVOID INJURY FROM UNEXPECTED ACCIDENT.
Keep hands & feet out of the
way of all moving parts. Do not place any part of your body or any tool e.g. in
moving parts of the machine during operation.
DO NOT FORCE TOOL.
Always work within the rated capacity. Do not operate
for a purpose for which it was not intended. Before operating vehicle on any
grade (hill) refer to the safety rules in the vehicle owner’s manual concerning
safe operation on slopes. Stay off steep slopes! Always operate at reduce speed
in rough terrain, along creeks, ditches and on hillsides. Do not operate close to
creeks, ditches and public highways. To avoid personal injury and/or equipment
damage
DO NOT EXCEED
5 MPH. Always use caution when loading and
unloading the cart.
Содержание Neilsen CT2210
Страница 2: ...1 ...
Страница 16: ...14 7 PARTS DRAWING ...
Страница 19: ...17 ...
Страница 20: ...18 CANNON TOOLS LTD Add 20 station road Rowley Regis west midlands B65 0JU U K Made in China ...