Cannon Tools Neilsen CT2210, Инструкция по эксплуатации

Страница: 11 / 20

9
STEP 4
1. Insert a Hex Bolt M8X45 with a Flat Washer Φ8 through the hole on the hopper,
like the picture d showing,then assemble the Wheel Bracket and Operating
Handle by a Nylon Lock Nut M8. The Lock Nut should not be tightened at this
moment.
2. Insert a Hex Bolt M8X20 through the other hole on the Wheel Bracket and
Operating Handle, and assemble them by a Nylon Lock Nut M8. Please tighten
the lock nut now.
STEP 5
Assemble the hopper, hitch tube and wheel bracket by a Hex Bolt M8X40 and a
Nylon Lock Nut M8.The lock nut should not be tightened at this moment.