Cannon Tools Neilsen CT2210, Инструкция по эксплуатации

Страница: 15 / 20

13
6. MAINTENANCE AND STORAGE
MAINTENANCE
● Rinse/dry inside and outside of the aerator spreader after each use.
●
Regularly grease axle and wheel bearing area or when needed.
● Periodically check all fasteners for tightness.
● Annually clean and lightly lubricate spike assembly and shaft or when needed.
● Use a glossy enamel spray paint to touch up scratched or worn painted metal
surfaces.
● Spikes periodically need to be sharpened with a small grinder to maintain good
penetration.
● Never exceed load capacity rating of 100lbs it will damage the equipment..
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer’s
specifications. Replacement parts that do not meet specifications may result in a
safety hazard or poor operations.
STORAGE
● Never allow material to be stored in the hopper for extended periods of time.
● Before storing make sure the aerator spreader is clean and dry for years of
trouble free service.
● Lightly lubricate all metal surfaces and moving parts to prevent rust.
● Store indoors or protected area during severe weather and winter months.