CANGAROO SNOWDROP, Руководство пользователя

Страница: 11 / 44

the manufacturer or the importer. In case you use such, your guarantee card will be
invalid.
12.Wash, rinse and sterilize all the parts of the breast pump after each use.
13.Do not clean the breast pump with strong detergents
– alcohol based ones, such
containing bleach or with abrasive parts.
14.Do not pump more than 5 minutes without a pause, if the milk does not express.
15.If the vacuum and pressure cause you discomfort or pain, stop using the breast
pump by firstly putting finger between the breast and silicone massage pad and the
remove the pump from your breast.
16.
WARNING! This product is intended for personal usage and it is not intended for
the usage of other mothers.
II. PARTS

See Figure A: 1. Handle; 2.Silicone diaphragm; 3.Suction adjustable lever (axle of the handle); 3.Pump body;
4.Silicone massage pad; 5.Valve; 6.Baby bottle; 7.Dust cap; 8.Bottle converter
III. ASSEMBLY OF THE MANUAL BREAST PUMP
Make sure that you have cleaned well and sterilized all the parts of the manual breast pump before starting its
assembly. Wash your hands thoroughly!
1.Step 1: With clean hands put the silicone valve (6) on the pump body (4).
2.Step 2: Attach to the pump body to the milk bottle.
3.Step 3: Attach the silicone diaphragm with the stem of the handle to the suction adjustable lever.
4.Step 4: Attach the silicone diaphragm with the stem of the handle on the upper part of the body of the pump,
by gently pushing its inner end with fingers as farther as possible and make sure that it fits perfectly to all sides
of the funnel of the pump body.
5.Step 5: Fix the handle on the pump to the axle and attach it to the intended for it stand on the pump body.
Push carefully until you hear a clicking sound showing the fixing of the handle.
6.Step 6: Attach the silicone massaging pad to the pump body by gently pushing its inner end as farther as
possible and make sure that it fits perfectly to all sides of the funnel of the pump body.
When you are not using the pump, put the dust cap on.
IV. METHOD OF USE
10
1.Wash your hands and make sure your breasts are clean. Express some milk, in order to check if the
milk ducts are blocked.
2.The pump must be sterilize and assembled.
3.Place your pump to your breast.
4.Make sure that the nipple is in the middle in order the silicone massage pad to fit perfectly to your
breast so as to create a perfect vacuum (do not let air in).
5.Start carefully pushing the handle downwards until you feel a slight suction. After that leave the
handle to return to the starting position. Repeat this step a few times fast in order to stimulate the
expression.
6.Establish a slower rhythm by pushing the handle downwards and keeping it pushed at most 3
seconds, before leaving it to return in the initial position. Continue doing this until expressing. If your
hand tires, try with the other one or leave the hand to relax onto your body and express from the other
breast.
7.Make sure that the milk flows successfully and the process of pumping does not make you
uncomfortable.
8.It is not necessary to push the handle completely downwards, but only to this position in which you
feel comfortable.
9.Do not worry if the milk
doesn’t flow immediately, relax and continue pumping. If the process is
causing you breast pains, stop immediately and consult with doctor.