Candela VelaShape, Инструкция по эксплуатации, Страница: 8 / 60

Copyright 2020 Product Guide. All Rights Reseved
When installing the system, ensure that the system is grounded through the grounding
conductor in the power cable. This protective grounding is essential for safe operation.
Operating the System
• Keep all system panels closed. Do not remove the panels and do not touch any of the
system's inner components.
• Keep your hands away from the applicators during system start-up.
• Always turn the system off before connecting/disconnecting an applicator, or the Dual
Connector.
• Keep the applicators clean and dry.
• Do not allow the replaceable applicator covers to come in contact with hard materials,
excessive heat or humidity; these may damage the RF electrodes.
• Never use the system in the presence of explosive or flammable materials.
• Make sure that all treatment personnel are familiar with the system's controls and know
how to shut down the system instantly.
Infrared Energy Safety Issues
The VelaShape emits gentle heating infrared light between 700-2000nm in a continuous wave
mode. Light emission is contained within the applicator chamber and occurs only when the
operator presses the trigger button on the applicator, when an adequate vacuum seal is
achieved and the RF electrodes are in full contact with the treated surface. Opaque eye protec-
tion should be used when working within a 30 cm proximity to the patient's eyes.
Do not aim the applicator at anything but the intended target area; it should always be oriented
toward the treatment area, and the trigger button pressed only when full contact is made with
the skin. In rare cases superficial crusting may be formed on the skin from the IR effect.
Installing the System